Multifunctional strength tentd - Power Rack HMS KLT22 grey

The HMS KLT22 folding Power Rack was designed to match current market trends and meet the expectations of the most demanding customers. The rack in this variant is sold with additional equipment. In addition to a pull-up bar, barbell hooks and safety supports, in it you'll also find a folding flat bench, a dip adapter, a wall-mounted plate rack and a bar holder. Such a set expands your exercise options and gives you new storage space for your equipment.

Multifunctional training in a small space

The KLT22 Power Rack is attached to the wall, which guarantees its stability and safety. When you're not using it, you can simply fold it, so it doesn't take up much space. This is a huge advantage of this device, because people with limited training space can use it. When the rack is folded against the wall, at its deepest point it takes up only 31 cm from the wall! One of the arms is fitted with a pneumatic piston, which makes folding (raising) the rack easier.

A stand and barbell hooks

The rack has a multifunctional pull-up bar, which, thanks to various grip options, lets you develop the back, shoulder and chest muscles. Pull-ups are one of the best upper body exercises, because they engage several muscle groups and improve joint mobility. If you want to make this exercise easier, just use special resistance bands. On the KLT22 you'll also find two bar hooks, which you can attach at any height.

Safety supports

The KLT22 Power Rack also includes special spotters that you can attach to the rack frame to ensure maximum safety when training with heavy weights. The spotters can be attached at almost any height and you can use them when performing exercises such as the bench press or barbell squats, without having to worry about no longer having enough strength to push the barbell back into the hooks. With the KLT22 you can push the limits of your own strength.

A folding flat bench

Together with the cage, you also receive a folding bench, which lets you perform exercises with dumbbells, resistance bands or barbells. The bench is comfortable and stable and, after finishing your exercise, you can fold it parallel to the wall.

A dip tool

Another accessory for the KLT22 is a dip adapter that attaches to the rack frame. Dips are an effective exercise for the triceps, shoulders and pectoral muscles. The adapter has comfortable grips and is easy to install and remove. You can mount it at various heights and thus adapt it to your height. The dip adapter is easy to maintain and has a long lifespan. With the adapter you also get a special wall mount on which you can hang it.

A wall-mounted weight rack

With the KLT22 set, you place the weights on a special rack, which is attached to the wall. This saves floor space and gives you easy access to the plates. The rack is made of durable materials. It has 6 holders, in which plates of various diameters and thicknesses can be placed. Each holder has a rubber cover, which protects the weights from scratches and noise. Its maximum load capacity is up to 1000 kg!

A wall-mounted bar rack

The last part of the set is a wall holder, on which two bars can be hung. Loading bars are an essential accessory for strength training to strengthen the whole body's muscles. The holder allows keeping the bars in order, so they don't take up floor space.

Note: The height of the rack when folded is 276 cm. If you want to use the folding function and your room is too low, we will shorten it free of charge by the required length on request.

Specifications:

• Material: steel, synthetic leather, PVC, rubber
• Area needed for installation: 150 x 150 cm


• The KLT22 rack:
• Frame dimensions in working position:
• Height: 230 cm
• Width: 142 cm
• Depth: 75 cm
• Frame dimensions when folded against the wall:
• Height: 276 cm
• Width: 142 cm
• Depth: 31 cm
• Outer width between frames: 124 cm
• Inner width between frames: 109 cm
• Frame profile: 75 x 75 x 3,5 mm
• Accessory holes: 21 (each 5,5 cm apart)
• Load capacity: 300 kg


• Bar hooks:
• Width: 7,5 cm
• Height: 17 cm
• Height adjustment: 48 - 164 cm


• A flat bench:
• Material: steel, synthetic leather, PVC
• Length: 100 cm
• The distance from the wall: 140 cm
• Height: 48 cm
• The height when folded against the wall: 140 cm


• A dip adapter:
• Material: steel
• The arms' distance: 35 - 53 cm
• Arm diameter: 4 cm
• Shoulder length: 58 cm
• Total length: 95 cm
• Height adjustment: 90 - 190 cm


• Safety supports:
• Material: steel, TPR
• Length: 60 cm
• Width: 5 cm
• Height adjustment: 90 - 170 cm


• A weight rack:
• Material: steel, rubber
• Height: 200 cm
• Width: 59 cm
• Pegs: 6 pcs, 20 x 5 cm
• Load capacity: up to 1 000 kg


• A bar rack:
• Material: steel
• Height: 13 cm
• Width: 16 cm
• Depth: 10 cm
• Bar hole diameter: 3,5 cm
• Number of stored bars: 2

Warning:

• Anchoring material is not included. The load capacity depends on the wall material and the anchoring material used.
• Class: H, not intended for commercial use
• 24-month warranty